G Series Steel on Heavy-duty Bronze Maintenance Required

Mating materials : Steel on heavy-duty bronze Maintenance required
Standard : Type G DIN ISO 12240-1 dimension series K 
Inner ring : Antifriction bearing steel, hardened, ground and polished.
Outer ring : Outer diameter ground. Sliding face made of high-duty bronze. Lubricant is distributed via the lubricating groove in the outer ring.
Lubrication : The lubricant enters the lubricating groove througth a cross hole in the outer ring.
Special versions : Available on request e.g. Sliding face of inner ring hard chromium plated.

Designation	d mm	d1 = mm	B mm	C mm	D mm	dk mm	Load rating static C0 kN	Tilt angle a°	Weight kg
G 3	3	5.1	6	4.50	10	7.9	8	13	0.004
G 5	5	7.7	8	6.00	13	11.1	15	13	0.007
G 6	6	8.9	9	6.75	16	12.7	19	13	0.010
G 8	8	10.3	12	9.00	19	15.8	31	13	0.016
G 10	10	12.9	14	10.50	22	19.0	43	13	0.031
G 12	12	15.4	16	12.00	26	22.2	58	13	0.065
G 14	14	16.8	19	13.50	28	25.4	74	15	0.090
G 16	16	19.3	21	15.00	32	28.5	92	15	0.100
G 18	18	21.8	23	16.50	35	31.7	112	15	0.125
G 20	20	24.3	25	18.00	40	34.9	135	15	0.180
G 22	22	25.8	28	20.00	42	38.1	164	15	0.210
G 25	25	29.5	31	22.00	47	42.8	203	15	0.295
G 30	30	34.8	37	25.00	55	50.8	273	15	0.425
G 35	35	37.7*	43	28.00*	62*	57.1	344	16	0.500
G 40	40	45.2*	49	33.00*	75*	66.6	473	17	0.900
G 50	50	56.6*	60	45.00	90	82.5	798	12	1.640

(*) Out of standard